Stereo/Mono Window - Yamaha M7CL Owner's Manual

STEREO/MONO window

In this window you can view and edit the parameters of the STEREO and MONO channels. The parameters shown
in the window can be selected from the [View] menu or the menu that appears when you right-click (<control> key
+ click) in the window.
You can access this window in the following ways.
●
From the [Windows] menu, choose [Overview] and then choose "STEREO/MONO"
●
Use the navigation keys in the Master window to turn on the [STEREO] button
1
2
3
4
A EQ (Equalizer)
Switches the EQ on/off (the L/R settings are linked). This is the same as the equalizer for
INPUT CH (➥ p.17).
B DYN1(Dynamics 1)
Switches the dynamics processor on/off. This is the same as the dynamics 2 for INPUT
CH (➥ p.17).
C INS (Insert)
Enables/disables the insert-in. (The L/R settings are linked.)
D MATRIX SEND
Here you can view and edit the send levels of the signals sent from the STEREO/MONO
channel to MATRIX 1–8 bus. The method of operation and the meaning of the display
are the same as for MATRIX in the MIX window (➥ p.23).
26 M7CL V3 Editor Owner's Manual