Yamaha M7CL Owner's Manual page 20

ST IN window ( M7CL-32/M7CL-48 only)
In this window you can view and edit the mix parameters of ST IN channels 1–4. The parameters shown in the win-
dow can be selected from the [View] menu or the menu that appears when you right-click (<control> key + click) in
the window.
You can access this window in the following ways.
●
From the [Windows] menu, choose [Overview] and then choose "ST IN"
●
Use the navigation keys in the Master window to turn on the [ST IN] button
1
2
3
4
5
6
A INPUT PATCH
Selects the input source that will be assigned to the ST IN channel. The input sources
that can be assigned are the same as for an INPUT CH (➥ p.16).
B HA GAIN
Drag the knob in the screen to adjust the gain of the internal head amp or of the exter-
nal head amp (e.g., Yamaha AD8HR, SB168-ES) patched to the ST IN channel.
C 48V
Switches on/off the phantom power (+48V) of the internal head amp or of the external
head amp (e.g., Yamaha AD8HR, SB168-ES) patched to the ST IN channel.
D
Ø (Phase)
Inverts the phase of the signal after AD conversion.
E
HPF (High Pass Filter)
Switches the high pass filter on/off. You can drag the numeric value up or down to edit
the cutoff frequency.
F
EQ (Equalizer)
Switches the EQ on/off (the L/R settings are linked). This is the same as the equalizer for
INPUT CH (➥ p.17).
20 M7CL V3 Editor Owner's Manual