Yamaha M7CL Owner's Manual page 46

❏ Fader
1
2
3
A ON
This switches the MATRIX channel on/off.
B Fader
This adjusts the output level of the MATRIX channel. A meter indicating the signal level
is shown at the right of the fader, and the current value is shown in the numerical box
immediately below. You can set this to the minimum value (–∞ dB) by holding down
the <Ctrl>(< >) key of your computer keyboard and clicking the fader knob, or set it
to the nominal value (0.00 dB) by holding down the <Ctrl>(< >) key and <Shift> key
and clicking the fader knob.
C CUE
This button cue-monitors the signal of the MATRIX channel.
46 M7CL V3 Editor Owner's Manual