Patch Editor window
Here you can assign the input/output port for each channel, its direct output, and its insert-in/out.
This window is divided into INPUT PATCH, OUTPUT PATCH, INPUT INSERT PATCH, OUTPUT INSERT PATCH,
DIRECT OUT PATCH, and PATCH LIST pages. To switch pages, click the tabs shown in the upper part of the window.
To display this window, choose [PATCH Editor] from the [Windows] menu, and select either "INPUT PATCH,"
"OUTPUT PATCH," "INPUT INSERT PATCH," "OUTPUT INSERT PATCH," "DIRECT OUT PATCH," or "PATCH
INPUT PATCH page
Here you can select the input port that is assigned to the input of each input channel.
Initializes the patching in this page.
❏ CLEAR ALL
Clears all patching in this page.
M7CL V3 Editor Owner's Manual