Intense M1 PRO Manual page 17

A
C
32
B
D
S T E P 1 0
ADJUST SADDLE &
SEATPOST HEIGHT
To adjust the height of your saddle use a 4mm Allen
key and loosen the collar (A) in order to raise or lower
to your desired height. If the seatpost is still to high
you can have the seatpost professionally trimmed.
The minimum insertion depth of 101mm/ 4" to ensure
the seattube does not get damaged, failure to adhere
to the insertion depth will void warranty. Finish by
torquing the seatpost clamp to 6-8Nm (B).
Saddle angle is based off personal preference. To
adjust your seat angle, loosen the bolt with a 5mm
Allen key (C), adjust the saddle angle and torque to
11-12Nm (D).
S T E P 1 1
INSTALL TIRE SEALANT &
CHECK TIRE PRESSURE
The M1's tires come without tubes and are ready for
tubeless conversion. Reference our tech videos if you
need further assistance.
The ideal tire pressure setting is determined by four
main factors: rider weight, type of terrain, design/
construction of tire and the desired balance of comfort
and traction. The pressures here are a suggested
starting point and can typically range +/- 5psi. Front:
26psi, rear: 29psi. It is always a good idea to inspect
your tires for tears and punctures before and after
every ride.
33