Intense M1 PRO Manual page 11

F
S T E P 4 C O N T I N U E D . . .
Once everything is lined up and in position, reinsert
the axle and tighten using a 6mm Allen key (F).
Finish off installing the rear axle by using the torque
wrench to 11Nm (G).
PRO BUILD: Now that the rear wheel and derailleur
are installed and torqued to spec, lip the Hall lock
lever up to the locked position (H).
EXPERT BUILD: You can now take the lock off your
SRAM rear derailleur. To do this, gently push the
derailleur cage forward a little, the lock will
automatically release, slowly let the derailleur arm
move backward into position.
G H
20 21