Sounding A Siren; Aquaquake Water Draining Function - Icom IC-F29DR3 Operating Instructions Manual

4
ADVANCED OPERATION

Sounding a Siren

Hold down [Siren] to emit a siren sound from the speaker to let surrounding people know that you are in an
emergency situation.
The siren will continuously sound until the transceiver is turned OFF.

AquaQuake Water Draining function

By vibrating the speaker cone, the AquaQuake Water Draining function clears water from the speaker grill to
maintain clear audio.
1. Hold down [AquaQuake] to turn ON the AquaQuake water draining function.
TIP: You can also turn ON this function, as shown below.
1. Rotate [VOL] to turn OFF the transceiver.
2. Set [Rotary Selector] to Channel 16.
3. While holding down [Upper] and [Lower], rotate [VOL] to turn ON the transceiver.
• A low frequency vibration is generated to remove water from the speaker grill.
• Water in the speaker grill may muffle the sound coming from the speaker.
2. Release the keys to turn OFF the function.
NOTE:
• After the specified period expires, this function automatically stops, even if a user continues to hold down these
keys.
• These keys work for only the internal speaker.
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com
14