SSV WORKS, 201 N. Rice Ave Unit A, Oxnard, CA 93030
www.SSVworks.com | Phone: 818-991-1778 | Fax: 866-293-6751
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects in material
or workmanship. All SSV Works Electronics are covered by a limited 1 year warranty against
defects in material or workmanship. All Kicker Speakers are covered by a limited 1 year
warranty against defects in material or workmanship. All Kicker Amplifiers are covered by a
limited 2 year warranty against defects in material or workmanship. Labor for replacement of
defective components is not covered. Contact SSV Works for further warranty information.
TOOLS NEEDED FOR INSTALLATION
- 18mm Wrench
PARTS LIST IMAGES
1. KX-PS10U Enclosure
5. Side Bracket
- T-30 Torx Driver
- 9/32" or 17/64" Drill Bit
2. M6 x 16mm Screws &
Washers x 12
6. B-H1389
PARTS LIST 2/3
Under Seat Subwoofer Enclosure
Please read and understand these
!
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
- Drill
3. Bottom Bracket
7. 5/16" x 2
4. Top Bracket
8. M6 x 25mm Screw
Washer & Spacer
3
Need help?
Do you have a question about the KX-Q3A2 and is the answer not in the manual?