SSV Works KX-Q3A2 Manual page 4

SSV WORKS, 201 N. Rice Ave Unit A, Oxnard, CA 93030
www.SSVworks.com | Phone: 818-991-1778 | Fax: 866-293-6751
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects in material
or workmanship. All SSV Works Electronics are covered by a limited 1 year warranty against
defects in material or workmanship. All SSV Works Speakers are covered by a limited 1 year
warranty against defects in material or workmanship. Labor for replacement of defective
components is not covered. Contact SSV Works for further warranty information.
TOOLS NEEDED FOR INSTALLATION
PARTS LIST IMAGES
1. KX-F65 Enclosures x2
6. Bracket "D"
4
- T-30 Torx Driver - 10mm Wrench
2. Bracket "A"
7. Bracket "E"
3. Bracket "B"
8. Bracket "F" 10. M6 x 16mm Screws
PARTS LIST 3/3
Kick Panel Speaker Pods
Please read and understand these
!
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
- Drill - 1/4" Drill Bit
4. Bracket "C" 5. Threaded Backing Plates x2
and Washers x14
- Punch Tool
11. M6 x 25mm Screw
and Locking Nut x2