SSV Works KX-Q3A2 Manual page 11

SUBWOOFER ENCLOSURE
A. Mount plates to sub enclosure using the torx screws provided.
B. Place sub enclosure in its designed location behind passenger
seat and using 9/32" or 17/64" drill bit, drill pilot holes where
needed.
D. Place sub enclosure back in its designed location, place plastic
spacer between sidewall of machine and side bracket. Tighten
bolt down.
A
B
D
A
C. Pull enclosure away and finish drilling.
E. Tighten bolts on back wall.
A
C
E
11