SSV Works RG4-Q3V1 Manual page 16

CONNECTING POWER & GROUND CABLE TO BATTERY
Break
off tab
A1. Remove the bottom cover of the fuse holder
by extracting the 2 screws. Break off the right
and left side tabs on the bottom cover.
B. Connect the power and ground wires to the battery.
16
Break
off tab
A1
A2. Extract both fuse holder screws and fasten
the fuse.
B
Power
Wire
A2
A3. Attach both the Power Wire and Battery
Terminal Cable to the fuse holder. Reattach
the bottom cover.
C. Zip tie all of the electrical cabling (factory and audio) along the center
column away from the drive shaft.
Battery
Terminal
Cable
A3
C