SSV Works RG4-Q3V1 Manual page 10

RGB LED CONTROLLER COMMAND CENTER PARTS LIST
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects in material or workmanship. All SSV Works Electronics are covered by a limited
1 year warranty against defects in material or workmanship. Labor for replacement of defective components is not covered. Contact SSV Works for further warranty
information.
PARTS LIST IMAGES
1. LIT-CC, 3 Output, RGB LED
Controller Command Center
NOTE:
Included Universal Controller
Pigtails are NOT used in this
installation.
RGB LED CONTROLLER COMMAND CENTER INSTALLATION
TOOLS NEEDED FOR INSTALLATION
- Wire Cutter
A. Install the LIT-CC RGB LED Controller Rocker Switch in an
unoccupied rocker switch opening.
NOTE:
Refer to the 230-LIT-CC User Guide for detailed operation instructions.
10
2. LIT-CC RGB LED Controller
Rocker Switch
- Wire Stripper - Crimper
3. Power Pigtail
A
B. Mount the LIT-CC RGB LED Controller Command Center in the
dash away from moving parts and secure with zip ties. Cut excess
zip ties for a clean install.
4. Zip Ties (x2)
B