SMC Networks C(D)RB1 50F Series Operation Manual page 20

Chamfered Position and Rotation Range: Top View from Long Shaft Side Chamfered positions shown
below illustrate the conditions of actuators when B port is pressurized.
・Single vane
・Double vane
Note)
Chamfer
(When B port is
pressurized)
For size 10, the tolerance of rotation angle of 90°will be
*4
Note)
The angle adjusting screw (adjustment bolt) is set at random within the adjustable rotating range.
Therefore, it must be re-adjusted to obtain the angle that suits your application. (Refer to page 11.)
For size 40 actuators, a parallel key will be used instead of chamfer.
For 90°
Port B
Port A
Recommended tightening torque for hexagon
Size
20
30,40
For 100°
Note)
Chamfer
(When B port is
pressurized)
Port A
and 100°will be
nut to fix the adjustment bolt
1.5N・m
3.0 N・m
19
Port B
.
A
D