Confirmations Upon Delivery; Checks; Nameplate Information - Omron VARISPEED G7 Instruction Manual

Confirmations upon Delivery

Checks

Check the following items as soon as the Inverter is delivered.
Item
Has the correct model of Inverter been
delivered?
Is the Inverter damaged in any way?
Are any screws or other components
loose?
If you find any irregularities in the above items, contact the agency from which you purchased the Inverter or
your Yaskawa representative immediately.

Nameplate Information

There is a nameplate attached to the side of each Inverter. The nameplate shows the model number, specifica-
tions, lot number, serial number, and other information on the Inverter.
Example Nameplate
The following nameplate is an example for a European standard Inverter: 3-phase, 200 VAC, 0.4 kW, IEC
IP20 and NEMA 1 standards
Inverter model
Input specifications Input specifications
Output
specifications
Lot number
Serial number
Table 1.2 Checks
Check the model number on the nameplate on the side of the Inverter.
Inspect the entire exterior of the Inverter to see if there are any scratches or
other damage resulting from shipping.
Use a screwdriver or other tools to check for tightness.
G C
Fig 1.1 Nameplate
Confirmations upon Delivery
Method
Inverter
specifications
Mass
3
1-