Quectel 5G Module Series User Manual page 15

Audio Interfaces
(U)SIM Card
Interfaces
SD Card Interface
Status Indicators
SLIC TE-A Interface
Module TE-A
PHY TE-A
Wi-Fi TE-A
5G-REDCAP_EVB_User_Guide
46
J0502 Codec board TE-A connector
J1706 Designed for loudspeakers
J0503 Audio jack for earphone
J0501 Designed for headset
J0804 (U)SIM1 card connector
J0801 (U)SIM2 card connector
J0701 SD card connector
D1402 Power supply ON/OFF indicator
Module operation status indicator,
D1203 indicating whether the module is
turned on
Network mode indicator, indicating
D1212
NET_MODE status of the module
Network status indicator,
D1210 indicating NET_STATUS status of
the module
Sleep status indicator, indicating
D1205
SLEEP status of the module
J0502 SLIC board TE-A connector
J0101,
Module TE-A connector
J0103
J0301,
J0302,
Connect PHY TE-A
J0401,
J0402
J0301,
Connect Wi-Fi TE-A
J0302
5G Module Series
115200 bps
Debug UART:
l For debugging
l Default baud rate:
115200 bps
l 1 digital audio codec board
interface:
Supports TLV320AIC3104
TE-A (default) codec board
3 analog audio interfaces:
l
Used for loudspeaker and
earphone
l Support (U)SIM card
insertion detection
l Support dual (U)SIM card:
1.8 V and 3 V
5 LEDs available for signal
indication
Supports SI32185 TE-A
(default) SLIC board
Used for connecting applicable
modules
J0301/J0302:
l Supports PCIe PHY
J0401/J0402:
l Supports SGMII/RGMII
interface PHY
l Supports SGMII PHY
QEP8111 by default
l Supports PCIe and SDIO
interfaces' Wi-Fi
Supports PCIe Wi-Fi
l
14 /