Omron NE1A-SCPU01 - 07-2009 Operation Manual page 44

System Configuration
System Combining a Distributed Safety Control System with Multiple NE1A-series
Controllers and a Centralized Monitoring System
10
This system uses each NE1A-series Controller as a Safety Master and estab-
lishes a Safety Remote I/O System with Safety Slaves.
Each NE1A-series Controller also simultaneously functions as a Standard
Slave and standard I/O communications are performed with the Standard
Master.
The Safety Control System can be monitored using a Standard PLC by allo-
cating the NE1A-series Controller's status information (general status, local
I/O error status, or other information) or logic operation results in the Standard
PLC.
In the DeviceNet Safety System, multiple Safety Masters can be connected
on the same network. Therefore, the distributed safety control blocks can be
monitored centrally on the same network.
Monitoring System
Standard PLC
Standard Master
Standard I/O
communications or
explicit messages
Safety Control System B
NE1A #1
Safety Master
Standard Slave
DST1 Safety Slave
NE1A #2
Safety Master
Standard Slave
DST1 Safety Slave
Section 1-2
Safety Control System A
Safety I/O communications
Safety Slaves by other manufacturers
Safety I/O communications
Safety Slaves by other manufacturers