Omron NE1A-SCPU01 - 07-2009 Operation Manual page 30

Unit Versions of NE1A-series Controllers
Unit Versions and Programming Devices
Model number
NE1A-SCPU01
Pre-Ver. 1.0
NE1A-SCPU01-V1 with unit
version 1.0
NE1A-SCPU02 with unit ver-
sion 1.0
NE1A-SCPU01-V1 with unit
version 2.0
NE1A-SCPU02 with unit ver-
sion 2.0
NE1A-SCPU01-EIP
NE1A-SCPU02-EIP
Note
Unit Versions and Configuration Data
Unit versions of NE1A-series
CPU Unit in Network
configuration files created
with Network Configurator
version 2.2@
Pre-Ver. 1.0 CPU Unit
CPU Unit with unit version 1.0
that does not support Ether-
Net/IP
CPU Unit with unit version 2.0 Not possible.
CPU Unit with unit version 1.0
that supports EtherNet/IP
Note
xxviii
Network Configurator version 2.0@ or higher must be used when using a
NE1A-SCPU01-V1 or NE1A-SCPU02 Safety Logic Controller with unit ver-
sion 2.0.
Network Configurator version 2.2@ or higher must be used when using a CPU
Unit that supports EtherNet/IP.
The following table shows the relationship between unit versions and Network
Configurator versions.
Ver. 1.3@ Ver. 1.5@
Can be used. Can be used.
Cannot be used. Cannot be used. Can be used.
Cannot be used. Cannot be used. Can be used.
Cannot be used. Cannot be used. Can be used.
Cannot be used. Cannot be used. Can be used.
Cannot be used. Cannot be used. Cannot be used. Cannot be used. Can be used.
Cannot be used. Cannot be used. Cannot be used. Cannot be used. Can be used.
(1) Can be used as a Controller with unit version 1.0.
(2) Network Configurator version 1.5@ or lower can be upgraded to version
1.6@ free of charge.
(3) When using Network Configurator version 1.6@, there are no operational
differences in the NE1A-SCPU01-V1 and NE1A-SCPU02 Safety Logic
Controllers that derive from the unit version.
The following table shows the relationship between unit versions of NE1A-
series Controllers in Network configuration files created with Network Config-
urator version 2.2@ and the unit version of NE1A-series Controllers to which
configuration files are downloaded.
NE1A-series CPU Unit to which configuration file is downloaded
Pre-Ver. 1.0 CPU CPU Unit with unit
Unit version 1.0 that
does not support
Downloading is pos- Not possible.
sible. (See note 1.)
Not possible. Downloading is pos-
sible.
Not possible.
Not possible. Not possible.
(1) Downloading is possible if the device type is changed using the function
provided in Network Configurator version 2.2@. For details, refer to
NE1A-series Controller Upgrade Procedure on page xxix.
(2) Only functions CPU Units with unit version 1.0 can be used.
Network Configurator
Ver. 1.6@
Can be used. Can be used.
Can be used.
Can be used.
Can be used.
(See note 1.)
Can be used.
(See note 1.)
CPU Unit with unit
version 2.0
EtherNet/IP
Not possible.
(See note 1.)
Downloading is pos-
sible. (See note 2.)
Downloading is pos-
sible.
Not possible.
Ver. 2.0@/2.1@ Ver. 2.2@
Can be used.
Can be used.
Can be used.
Can be used.
Can be used.
CPU Unit with unit
version 1.0 that
supports EtherNet/
IP
Not possible.
(See note 1.)
Not possible.
(See note 1.)
Not possible.
(See note 1.)
Downloading is pos-
sible.
7