Omron NE1A-SCPU01 - 07-2009 Operation Manual page 192

Command Reference: Function Blocks
Number of Inputs Setting
Parameter
Number of inputs
Optional Output Settings
158
Low-High-Low
Monitored
Input
Reset
Output
Enable
The number of inputs can be increased on the In/Out Setting Tab Page in the
function block property dialog box.
2 to 8 (Optional Input Settings)
The outputs shown below can be used in the program. To enable either of
these outputs, select the checkbox on the Out Point Tab Page of the function
block properties dialog box.
• Static Release
• Restart Required Indication
Rising Edge
Monitored
Input
350 ms min.
Reset
Output
Enable
Setting range
Section 8-5
Default setting
2