Omron NE1A-SCPU01 - 07-2009 Operation Manual page 105

Remote I/O Allocations
Data That Can Be Set and Example Arrangements
Data type
Status
I/O tags
Data type
Status
Local I/O
monitor
I/O tags
Sample 3: Transmitting Only Status Data as Standard Slave Inputs
Status Data
Status A
Status B
Status C
Status D
Input Data
Not set up
The following table shows the data that can be set.
• Pre-Ver. 1.0 NE1A-series Controllers
Name/format
General Status
Local Input Status
Local Output Status
Test Output/Muting Lamp Status
BOOL I/O Tags
BYTE I/O Tags
WORD I/O Tags
DWORD (Double Word) I/O Tags
• NE1A-series Controllers with Unit Version 1.0 or Later (Including Control-
lers that Support EtherNet/IP)
Name/format
General Status
Local I/O Status
1 to N (See note 1.)
Local Output Status
Test Output/Muting Lamp Status
1 to M (See note 1.)
Local Input Monitor
1 to N (See note 1.)
Local Output Monitor
BOOL I/O Tags
BYTE I/O Tags
WORD I/O Tags
DWORD (Double Word) I/O Tags
Standard Slave
Inputs
Status A
Status C
Data size Setting method using
Network Configurator
Byte Set using checkbox.
Word Set using checkbox.
Byte Set using checkbox.
Byte Set using checkbox.
Byte User registered.
Byte User registered.
Word User registered.
Double User registered.
word
Data size Setting method using
Network Configurator
Byte Set using checkbox.
Byte Set using checkbox.
Byte Set using checkbox.
Byte Set using checkbox.
Byte Set using checkbox.
Byte Set using checkbox.
Byte User registered.
Byte User registered.
Word User registered.
Double User registered.
word
Section 4-3
Connection
Attribute
Non-
safety
Safety
Safety
Non-
safety
Safety
Safety
Safety
Safety
Attribute
Non-
safety
Safety
Safety
Non-
safety
Safety
Safety
Safety
Safety
Safety
Safety
71