Table of Contents
Advertisement
Web Page Item
Application
Load new firmware to Partition 1
New Filename
2.5.1 Reboot the Loudspeaker Amplifier
To reboot a loudspeaker amplifier, log in to the web page as instructed in
Configuration Home
1. Click Upgrade Firmware to open the Firmware Upgrade page
VoIP Loudspeaker Amplifier Operations Guide
Table 2-13. Firmware Upgrade Parameters (continued)
Page".
System section on the right side of the page.
Upgrade the Firmware and Reboot the Loudspeaker Amplifier
Description
Shows the current application filename for partition 1
and 2.
Enter the TFTP Server IP address.
Enter the new file name for the kernel or application
firmware file that you are uploading.
Click on this button to automatically upload the selected
firmware and reboot the system.
Link to the Speaker Setup page.
Link to the Network Setup page.
Link to go to the SIP Setup page.
Link to the MGROUPS Setup page.
Link to the Home page.
Click on this button to reboot the system.
930111F
Installing the VoIP Loudspeaker Amplifier
Section 2.3.1, "Log in to the
(Figure
2-18). Use the Reboot
CyberData Corporation
27
Advertisement
Table of Contents
Need help?
Do you have a question about the VoIP Loudspeaker Amplifier Part #010859 and is the answer not in the manual?
Questions and answers