Set Up The Loudspeaker Amplifier - CyberData VoIP Loudspeaker Amplifier Part #010859 Operation Manual

2.3.3 Set up the Loudspeaker Amplifier

1. Click the Speaker Setup button to open the Speaker Setup page. See
2. On the Loudspeaker Amplifier Setup page, enter values for the parameters indicated in
Web Page Item
Device Name
Select Speaker Function
Change Web Access Username
Change Web Access Password
Re-enter New Password
Speaker Tone Before Paging
Speaker Tone After Initialization
VoIP Loudspeaker Amplifier Operations Guide
Figure 2-14. Loudspeaker Amplifier Setup
Table 2-10.
Table 2-10. Loudspeaker Amplifier Setup Parameters
Configure the Loudspeaker Amplifier Parameters
Description
Enter a descriptive name for this device (if desired).
Select SIP or MGROUPS.
Use this field to change the Web Access Username
Use this field to change the Web Access Password
Use this field to re-enter a new password
Enable/Disable the speaker tone (beep) before each page.
Enable/Disable the speaker tone (beep) after the system
startup.
930111F
Installing the VoIP Loudspeaker Amplifier
Figure 2-14
CyberData Corporation
19