1. Manuals
  2. Brands
  3. CyberData Manuals
  4. Amplifier
  5. Part #010861
  6. Operation manual

CyberData Part #010861 Operation Manual

Voip loudspeaker amplifier (poe)
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
VoIP Loudspeaker Amplifier
Operations Guide
(PoE)
Part #010861
930106C

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Part #010861 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for CyberData Part #010861

Summary of Contents for CyberData Part #010861

  • Page 1 VoIP Loudspeaker Amplifier Operations Guide (PoE) Part #010861 930106C...
  • Page 2 CyberData Corporation. This manual, and the products, software, firmware, and/or hardware described in this manual are the property of CyberData Corporation, provided under the terms of an agreement between CyberData Corporation and recipient of this manual, and their use is subject to that agreement and its terms.

  • Page 3: Revision History

    Revision History Revision CyberData Corporation Date Released Description of Changes 11/06/2006 This is the first release of this manual. 01/16/2007 Adds Section 2.4, "Set up the 4/13/2007 Changes the Authenticate ID and password character limit from 30 to 25 in Table 2-11.
  • Page 4 CyberData Corporation 930106C VoIP Loudspeaker Amplifier Operations Guide...

  • Page 5: Table Of Contents

    B.0.1 In a LINUX Environment ...31 B.0.2 In a Windows Environment ...31 Appendix C Troubleshooting/Technical Support C.1 Frequently Asked Questions (FAQ) ...33 C.2 Documentation ...33 C.3 Contact Information ...33 C.4 Warranty ...34 Index VoIP Loudspeaker Amplifier Operations Guide 930106C CyberData Corporation...
  • Page 6 CyberData Corporation 930106C VoIP Loudspeaker Amplifier Operations Guide...

  • Page 7: Chapter 1 Product Overview

    Figure 1 illustrates how the VoIP Loudspeaker Amplifier (PoE) is normally installed as part of a public address system. VoIP Loudspeaker Amplifiers—PoE VoIP Loudspeaker Amplifier Operations Guide Figure 1. Public Address System Generic PoE Hub VoIP Phone 930106C Server CyberData Corporation...

  • Page 8: Product Features

    PCMA (G.711 A-law) Packet Time 20 ms 1.4 Supported SIP Servers The following link contains information on how to configure the loudspeaker amplifier for the supported SIP servers: http://www.CyberData.net/support/voip CyberData Corporation VoIP Loudspeaker Amplifier 930106C ● Multicast support ● SIP (RFC 3261) compatible ●...

  • Page 9: Product Specifications

    Weight VoIP Loudspeaker Amplifier Operations Guide Specification 96dB/1W/1M S.P. Level 8 W PoE/16 W with internal power supply 10/100 Mbps 802.3af compliant SIP RFC 3261 010861 14” x 10” x 4” 4.4 lbs. 930106C Product Overview Product Specifications CyberData Corporation...
  • Page 10 Product Overview Product Specifications CyberData Corporation 930106C VoIP Loudspeaker Amplifier Operations Guide...

  • Page 11: Chapter 2 Installing The Voip Loudspeaker Amplifier

    Quantity Loudspeaker Amplifier Assembly Installation Quick Reference Guide Loudspeaker Amplifier Mounting Accessory Kit (part #070057A) which includes: 3 x #8 x 1-1/4” truss head screws VoIP Loudspeaker Amplifier Operations Guide Table 2-1. Parts List Part Name 930106C Illustration CyberData Corporation...

  • Page 12: Loudspeaker Amplifier Setup

    Installing the VoIP Loudspeaker Amplifier Loudspeaker Amplifier Setup 2.2 Loudspeaker Amplifier Setup Set up and configure each loudspeaker amplifier before you mount it. CyberData delivers each loudspeaker amplifier with the factory set default values indicated in Table 2-2: Parameter IP Addressing...

  • Page 13: Loudspeaker Amplifier Jumpers

    OFF -> Low Power (21V) Position B -> Low Power Table 2-4. Jumper Settings—High Power—Non-PoE Compliant Setting ON -> High Power (21V) ON -> High Power (21V) Position A -> High Power 930106C Installing the VoIP Loudspeaker Amplifier Loudspeaker Amplifier Setup CyberData Corporation...

  • Page 14: Connect The Loudspeaker Amplifier

    2.2.3 Connect the Loudspeaker Amplifier Figure 2-3 illustrates how to connect the VoIP Loudspeaker Amplifier (PoE). Figure 2-3. Connect a Loudspeaker Ethernet Hub Optional 2 Speaker Configuration Standard 1 Speaker Configuration 8 Ohms 8 Ohms CyberData Corporation 930106C VoIP Loudspeaker Amplifier Operations Guide...

  • Page 15: Loudspeaker Type

    Ethernet a.Consult a licensed electrician for local electrical code requirements. 2.2.3.1 Loudspeaker Type The CyberData VoIP Loudspeaker Amplifier supports an 8 Ohm Bogen or equivalent unamplified loudspeaker. See 2.2.3.2 Cabling/Wiring You may connect a loudspeaker to a loudspeaker amplifier with a good quality speaker cable that is limited to 25 feet in length.

  • Page 16: Confirm Operation

    Power Status Link Activity CyberData Corporation Figure 2-5. Loudspeaker Amplifier LEDs—Power and Link Figure 2-6. Loudspeaker Amplifier LEDs—Status and Activity Table 2-6. Loudspeaker Amplifier LEDs Color...

  • Page 17: Confirm The Ip Address, Test The Audio, And Check The Volume

    Section 2.6, "Restore the Factory Default Settings" settings. See VoIP Loudspeaker Amplifier Operations Guide Installing the VoIP Loudspeaker Amplifier (Figure 2-7) on the loudspeaker amplifier face to announce Figure 2-7. RTFM Switch 930106C Loudspeaker Amplifier Setup RTFM switch CyberData Corporation...

  • Page 18: Adjust The Volume

    Installing the VoIP Loudspeaker Amplifier Loudspeaker Amplifier Setup 2.2.6 Adjust the Volume To adjust the loudspeaker amplifier volume, turn the Volume dial amplifier face. CyberData Corporation (Figure Figure 2-8. Volume Control 930106C VoIP Loudspeaker Amplifier Operations Guide 2-8) on the loudspeaker...

  • Page 19: Configure The Loudspeaker Amplifier Parameters

    VoIP Loudspeaker Amplifier Operations Guide Installing the VoIP Loudspeaker Amplifier Configure the Loudspeaker Amplifier Parameters Chapter A, “Mounting the Enclosure” Table 2-7. Factory Default Settings Factory Default Setting static 192.168.3.10 admin admin 255.255.255.0 192.168.3.1 (Figure 2-9): 930106C Table 2-7. CyberData Corporation...
  • Page 20 Web Page Item Serial # Ethernet Address IP Addressing IP Address Subnet Mask Default Gateway CyberData Corporation Figure 2-9. Home Page VoIP Loudspeaker Amplifier Table 2-8. Home Page Overview Description Device serial number. Device ethernet address. Shows the current IP addressing setting (DHCP or static).

  • Page 21: Configure The Network Parameters

    Click on this button to save your configuration settings. Changing a parameter that has an asterisk next to it will cause a system reboot when saved. 930106C Installing the VoIP Loudspeaker Amplifier (Figure 2-10). Table 2-9. Table 2-9 . If you select DHCP, CyberData Corporation...
  • Page 22 4. Connect the speaker to the target network. 5. From a system on the same network as the speaker, open a browser with the new IP address of the speaker. CyberData Corporation Table 2-9. Network Setup Parameters Description Link to the Speaker Setup page.

  • Page 23: Set Up The Loudspeaker Amplifier

    Use this field to re-enter a new password. Enable/Disable the speaker tone (beep) before each page. Enable/Disable the speaker tone (beep) after the system startup. Enable/Disable the speaker tone (beep) and audio associated with the RTFM switch. 930106C Installing the VoIP Loudspeaker Amplifier Figure 2-11 CyberData Corporation...

  • Page 24: Configure The Sip Parameters

    1. Click SIP Setup to open the SIP Setup page Note For specific server configurations, go to the following URL: http://www.CyberData.net/support/voip CyberData Corporation Table 2-10. Loudspeaker Amplifier Setup Parameters Description Click on this button to save your configuration settings. Changing a parameter that has an asterisk next to it will cause a system reboot when saved.
  • Page 25 Installing the VoIP Loudspeaker Amplifier Configure the Loudspeaker Amplifier Parameters Figure 2-12. SIP Setup Page VoIP Loudspeaker Amplifier VoIP Loudspeaker Amplifier Operations Guide 930106C CyberData Corporation...
  • Page 26 SIP Registration* Unregister on Reboot* Register Expiration* 3. After changing the parameters, click Save Settings. CyberData Corporation Table 2-11. SIP Setup Parameters Description Enter the SIP server represented as either a numeric IP address in dotted decimal notation or the fully qualified host name (FQHN) up to 64 characters.

  • Page 27: Set Up The Mgroups

    A MGROUP is a way of assigning multicast addresses and port numbers when configuring multicast paging speakers. 1. Click on the MGROUPS Setup button to open the MGROUPS Setup page. See CyberData Speaker 2. On the MGROUPS Setup page, enter values for the parameters indicated in Web Page Item...
  • Page 28 Port 2000-65535 Priority MGROUP Name Beep 3. After changing the parameters, click Save Settings. CyberData Corporation Table 2-12. MGROUPS Setup Parameters Description Enter the multicast IP Address of a MGROUP. Enter the port number of a MGROUP. Assign the priority to a MGROUP (the higher the number, the higher the priority).

  • Page 29: Upgrade The Firmware And Reboot The Loudspeaker Amplifier

    If you do not already have a TFTP server running on your network, see TFTP Server”. 2. Retrieve the latest speaker firmware from the CyberData website: www.CyberData.net/support/voip 3. Unzip the speaker version file. This file may contain the following: •...
  • Page 30 Table 2-13 Web Page Item System Configuration Bootname Kernel CyberData Corporation Figure 2-14. Firmware Upgrade Page VoIP Loudspeaker Amplifier if you are uploading the Kernel and Application files. shows the web page items on the Firmware Upgrade page. Table 2-13. Firmware Upgrade Parameters Description Shows the current configuration.

  • Page 31: Reboot The Loudspeaker Amplifier

    Link to go to the SIP Setup page. Link to the MGROUPS Setup page. Link to the Home page. Click on this button to reboot the system. Page". 930106C Installing the VoIP Loudspeaker Amplifier Section 2.3.1, "Log in to the (Figure 2-15). Use the Reboot CyberData Corporation...
  • Page 32 Upgrade the Firmware and Reboot the Loudspeaker Amplifier Figure 2-15. Reboot System Section VoIP Loudspeaker Amplifier 2. Click Reboot. A normal restart will occur as per the Status LED section of Table 2-6. CyberData Corporation 930106C VoIP Loudspeaker Amplifier Operations Guide...

  • Page 33: Restore The Factory Default Settings

    VoIP Loudspeaker Amplifier Operations Guide 2-14. The other parameters in the current loudspeaker amplifier configuration Table 2-14. Factory Default Settings Factory Default Setting static 192.168.3.10 admin admin 255.255.255.0 192.168.3.1 930106C Installing the VoIP Loudspeaker Amplifier Restore the Factory Default Settings CyberData Corporation...
  • Page 34 Installing the VoIP Loudspeaker Amplifier Restore the Factory Default Settings CyberData Corporation 930106C VoIP Loudspeaker Amplifier Operations Guide...

  • Page 35: Appendix A: Mounting The Enclosure

    For mounting, use the three #8 SHEET METAL SCREWS to secure the enclosure. VoIP Loudspeaker Amplifier Operations Guide Table A-15. Table A-15. Wall Mounting Components (Part of the Accessory Kit) Part Name #8 Sheet Metal Screws to mount the enclosure. 930106C Illustration CyberData Corporation...
  • Page 36 Mount the Enclosure Figure A-1. Loudspeaker Amplifier Enclosure Assembly CyberData Corporation 930106C VoIP Loudspeaker Amplifier Operations Guide...

  • Page 37: Appendix B: Setting Up A Tftp Server

    4. You can find several options online for setting up a Solarwinds server. This example explains how to use the Solarwinds freeware TFTP server, which you can download at: http://www.CyberData.net/support/voip VoIP Loudspeaker Amplifier Operations Guide /tftpboot/ Configure Security tab Transmit Only. 930106C is the path to the directory you created in CyberData Corporation...
  • Page 38 Set up a TFTP Server CyberData Corporation 930106C VoIP Loudspeaker Amplifier Operations Guide...

  • Page 39: Appendix C: Troubleshooting/Technical

    Phone: 831-373-2601, Extension 136 Email: RMA@CyberData.net When returning a product to CyberData, an approved CyberData RMA number must be printed on the outside of the original shipping package. No product will be accepted for return without an approved RMA number. Send the product, in its original package, to the following address:...

  • Page 40: Warranty

    CyberData warrants its product against defects in material or workmanship for a period of two years from the date of purchase. Should the product fail within the warranty period, CyberData will repair or replace the product free of charge. This warranty includes all parts and labor.

  • Page 41: Index

    IP settings 13 network 15 SIP 18 using Web interface 13 configuration home page 13 CyberData contact information, corporate, sales, tech support, service 33 default gateway 6, 13, 27 IP address 6, 13, 27 loudspeaker amplifier settings 35...
  • Page 42 SIP 20 remote SIP 20 port baud rate 3 power LED 10 power requirement 3 power, connecting to loudspeaker amplifier 8 product CyberData Corporation configuring 13 mounting 29 parts list 5 product features 2 product overview product features 2...
  • Page 43 6, 13, 27 web access username 6, 13, 27 web configuration log in address 13 web-based loudspeaker amplifier configuration 13 weight 3 Windows, setting up a TFTP server on 31 VoIP Loudspeaker Amplifier Operations Guide 930106C CyberData Corporation...
  • Page 44 CyberData Corporation 930106C VoIP Loudspeaker Amplifier Operations Guide...

This manual is also suitable for:

10861

Table of Contents

Save PDF