Upgrade The Firmware And Reboot The Loudspeaker Amplifier - CyberData 011116 Operation Manual

2.3.3 Upgrade the Firmware and Reboot the Loudspeaker Amplifier

To upload the Loudspeaker Amplifier firmware from your PC:
1. Set up a TFTP server.
2. Retrieve the latest Loudspeaker Amplifier firmware from the VoIP V2 Loudspeaker Amplifier
3. Unzip the Loudspeaker Amplifier version file. This file may contain the following:
•
•
4. Copy the firmware files to be upgraded to the appropriate TFTP server directory:
•
•
5. Log in to the Loudspeaker Amplifier home page as instructed in
Operations Guide
If you do not already have a TFTP server running on your network, see
a TFTP Server".
Downloads page at:
http://www.cyberdata.net/products/voip/digitalanalog/singlewireloudspeakerampv2/downloads.html
Firmware file
Release notes
c:\tftp-root\for Windows
/tftpboot/for Linux
Configuration Home Page".
Configure the Loudspeaker Amplifier Parameters
930377F
Installing the VoIP V2 Loudspeaker Amplifier
Appendix B, "Setting up
Section 2.3.2, "Log in to the
CyberData Corporation
21