CyberData VoIP Loudspeaker Amplifier Part #010859 Operation Manual page 26

18 Installing the VoIP Loudspeaker Amplifier
Configure the Loudspeaker Amplifier Parameters
Web Page Item
CyberData Corporation
Table 2-9. Network Setup Parameters (continued)
3. After changing the parameters, click Save Settings. This updates the changed parameters and
reboots the speaker if appropriate.
4. Connect the speaker to the target network.
5. From a system on the same network as the speaker, open a browser with the new IP address of
the speaker.
Description
Link to the Speaker Setup page.
Link to the SIP Setup page.
Link to the MGROUPS Setup page.
Link to the Upgrade Firmware page.
Link to the Home page.
930111F VoIP Loudspeaker Amplifier Operations Guide