Installation On A Din Track - Omron GRT1 - 11-2007 Operation Manual

Installation
Connecting the End
Unit
Note
3-1-3

Installation on a DIN Track

DIN Track Installation
PFP-50N (50 cm) or PFP-
100N (100 cm) DIN Track
PFP-M End Plate (Two
Required)
32
A GRT1-END End Unit must be connected to the end of the Slice I/O Termi-
nal.
GRT1-END End Unit
When connecting Units, always align the guide tracks on the top and bottom
of the Units and be sure that they join properly as you slide the Unit toward the
DIN Track.
Mount the Communications Unit and Slice I/O Units on a DIN Track. Attach
the DIN Track with screws in every fourth mounting hole.
Attach the track with screws at a
maximum spacing of 105 mm
between adjacent screws.
Section 3-1