Omron GRT1 - 11-2007 Operation Manual page 146

Analog Input Units
Setting Procedure (Example: DeviceNet Configurator)
1,2,3...
regarded as the rate of change. To prevent this occurring, use moving average
processing, which will set a longer sampling cycle.
Desired gradient
Fluctuation in analog value
Short sampling cycle Long sampling cycle
1. In the Network Configuration Window for the Slice I/O Terminal, double-
click the icon of the Slice I/O Terminal that is to be set. Alternatively, right-
click the icon and select Parameters - Edit. The Edit Device Parameters
Window will be displayed.
2. Click the I/O Module Tab.
3. Click the Edit Button on the I/O Module Tab Page. The Edit Unit Parame-
ters Window will be displayed.
4. Select the tab page for the input where rate of change is to be set, and se-
lect the Rate of Change Check Box in the Function Choice Area.
Section 5-4
125