Maintenance Information Window
7-3
Maintenance Information Window
7-3-1
Checking Maintenance Information
Bit
Content
12
Reserved
13
Reserved
14
Reserved
15
Reserved
16
Reserved
This section describes the Maintenance Information Window, which can be
used to monitor the status of Counter Units and Positioning Units. The Monitor
Device Window can be used to check the same Unit status information, but
the examples in this section use the Maintenance Information Window.
There are two ways to check maintenance information. One way is to right-
click in the Main Window of the Setting Tool and select Maintenance Infor-
mation. The other way is to double-click the Unit in the Maintenance Mode
Window, click the I/O Module Tab, select the desired Unit, and click the View
Button to display the Maintenance Information Window of the Counter Unit or
Positioning Unit.
Section 7-3
Description
---
---
---
---
---
229