Omron GRT1 - 11-2007 Operation Manual page 42

Functions Shared by all Units
Setting with a
Programming Device
1,2,3...
• Measuring unit: 0.1 hr
Host Master
Communications
Unit
Corresponding bit is turned
ON in the Communications
Unit's status flags.
Note The Unit conduction time monitor (Power ON time monitor) calculates the total
time that Network power supply is ON. The total time is not calculated when
the power is OFF.
This example shows how to use the DeviceNet Configurator (version 2.43 or
higher) to set the monitor value for the Unit Conduction Time.
1. Open the Network Configuration Window and double-click the desired
Slice I/O Terminal's icon or right-click the icon and select Parameters -
Edit to display the Edit Device Parameters Window.
2. Click the I/O Module Tab.
Slice I/O Unit
Recorded in Unit
Corresponding bit
turned ON when
monitor value is
exceeded.
Total ON time
Internal circuit
power
Section 2-3
ON
OFF
21