Functions Shared by all Units
2-3-6
I/O Comments
Function Overview
2. Click the I/O Module Tab.
3. Click the Edit Button to display the Edit Unit Parameters Window.
4. Input the desired name in the Comment Field.
5. Click the Download Button, and then click the Reset Button to reset the
Unit.
6. Click the OK Button.
The user can assign a name for each of the Unit's I/O contacts (up to 32 char-
acters) and record it in the Unit. The connected device can be checked for
each I/O contact, allowing faulty devices to be identified during remote main-
tenance. The network Programming Device can be used to read and write the
names (comments) of the connected devices.
Section 2-3
23