Omron GRT1 - 11-2007 Operation Manual page 195

Temperature Input Units
Input Type Range
GRT1-TS2P
GRT1-TS2PK
GRT1-TS2T
174
5. Double-click the Value Setting for the Input Type on the Range/Data Allo-
cation Tab Page and select the desired input type from the pull-down
menu.
6. Return to the General Tab Page, click the Download Button, and then click
the Reset Button to reset the Unit.
7. Click the OK Button to exit the window.
Note The Input Type cannot be changed from the Setting Tool if the mode for set-
ting the Input Type with the DIP switch has been specified.
The input type range can be set with the DIP switch or the Setting Tool.
Input type
−
PT100 ( 200 to 850
−
PT100 ( 200 to 200
Input type
−
PT1000 ( 200 to
°
850 C)
−
PT1000 ( 200 to
°
200 C)
Note The ranges in the above table are the ranges for which the speci-
fied accuracy applies.
Input type
R
S
K (−200 to 1300°C)
K (0.0 to 500.0°C)
J (−100 to 850°C)
J (0.0 to 400.0°C)
T
E
°
Range in C
° −
C) 200.0 to 850.0
° −
C) 200.0 to 200.0
°
Range in C
−
200.0 to 850.0
−
200.0 to 200.0
°
Range in C
0 to 1,700
0 to 1,700
−
200 to 1,300
0.0 to 500.0
−
100 to 850
0.0 to 400.0
−
200.0 to 400.0
0 to 600
Section 6-4
°
Range in F
−
300 to 1,500
−
300 to 380.0
°
Range in F
−
300 to 1,500
−
300 to 380.0
°
Range in F
0 to 3,000
0 to 3,000
−
300 to 2,300
0.0 to 900.0
−
100 to 1,500
0.0 to 750.0
−
300.0 to 700.0
0 to 1,100