Omron GRT1 - 11-2007 Operation Manual page 221

Temperature Input Units
Comparator
200
4. Select the Tab Page for the input where rate of change is to be set, and
select the Rate of Change Option in the Function Choice Area.
5. To set the sampling cycle, click the Rate of Change Tab and input the de-
sired value for the sampling cycle in the Sampling Rate Field.
6. Return to the General Tab, click the Download Button, and then click the
Reset Button to reset the Unit.
7. Click the OK Button and exit the window.
When the High High Limit, High Limit, Low Low Limit, and Low Limit are set in
the Unit, a Status Flag will turn ON when a value exceeds a setting range. The
four set values are High High Limit (HH), High Limit (H), Low Low Limit (LL),
and Low Limit (L), and the values can be compared with those in Temperature
Data.
The setting range is from − 415000 to 415000.
Section 6-4