GRT1-TBR Right Turnback Unit
8-1
GRT1-TBR Right Turnback Unit
Component Names
and Functions
Dimensions
8-2
GRT1-TBL Left Turnback Unit
274
When a Slice I/O Terminal is divided into blocks to expand the system, mount
a GRT1-TBR Right Turnback Unit to the right side of the first block, start a
new block with a GRT1-TBL Left Turnback Unit, and connect the two Turnback
Units with a GCN2-100 Turnback Cable.
TBR
Turnback Cable connector
When a Slice I/O Terminal is divided into blocks to expand the system, mount
a GRT1-TBR Right Turnback Unit to the right side of the first block, start a
new block with a GRT1-TBL Left Turnback Unit, and connect the two Turnback
Units with a GCN2-100 Turnback Cable.
Note
When dividing the power supply, always wire the power from the same power
supply that supplies the Communications Unit.
19.5
2.2
12.5
Section 8-1
OMRON
55.7