Maintenance Information Window; Checking Maintenance Information - Omron GRT1 - 11-2007 Operation Manual

Maintenance Information Window

6-3 Maintenance Information Window
6-3-1

Checking Maintenance Information

General Tab Page
164
Bit Contents
9 Cold junction compensator
error (GRT1-TS2T only)
10 Reserved.
11 Reserved.
12 Reserved.
13 Reserved.
14 Reserved.
15 Reserved.
This section describes the Maintenance Information Window, which can be
used to monitor the status of a Temperature Input Unit.
There are two ways to check maintenance information. One way is to
right-click in the Main Window of the Setting Tool and select Maintenance
Information. The other way is to double-click the Unit in the Maintenance
Mode Window, click the I/O Module Tab, select the desired Unit, and click the
View Button to display the Maintenance Information Window of the I/O Unit.
Section 6-3
Description
OFF: Normal; ON: Error
---
---
---
---
---
---
Status check boxes