INVT Goodrive880 Series Hardware Manual page 39

Goodrive880 Series Water-Cooled Drive Hardware Manual
Step 2 When the water-cooled unit mounting holes reach the fixed holes on the sheet metal, lock the four
fixing screws (M8X30) on the water-cooling plate of the water-cooled rectifier unit to fix the unit in
the cabinet, as shown in Figure 3-17.
Note:
When installing or replacing the unit, wear gloves and safety shoes to prevent against scratching or

smashing.
3.3.5.6 Keypad installation
The VFD is equipped with an externally mounted keypad (as shown in Figure 3-18), which is used with a
keypad bracket that can be fixed to the cabinet door or external support sheet metal, and the keypad bracket
mounting structure is shown in Figure 3-19.
RUN/TUN
FWD/REV LOCAL/REMOT
E
PRG DATA
ESC ENT
QUICK
JOG SHIFT
RUN
202212 (V1.0)
Figure 3-17 Unit entry to the cabinet
Figure 3-18 LED keypad structure
TRIP
Hz
RPM
A
%
V
>
STOP
RST
键盘无支架安装开孔尺寸及示意图
Mechanical installation
34