Table of Contents
Advertisement
Comms > IP Reporting >
SIA IP Prefix
1
Account
0
0
0
0
Dest Nº 1
1
Account
0
0
0
0
Dest Nº 2
Account Prefix
Dest Nº 1
Account Prefix
Dest Nº 2
Receiver Prefix
Dest Nº 1
Receiver Prefix
Dest Nº 2
Account Number
The account number is the most specific token and is
always programmed into the premises equipment to
identify it. The account token appears both in the header
of the message (which is never encrypted) and in the
data of the message (which may be encrypted).
This element consists of an ASCII "#", followed by 3 to 16
ASCII characters representing hexadecimal digits for the
account number. There is no corresponding element in
the DC-07 protocol.
In certain special applications, the information provided
in the #acct element may not match the account number
contained within the message data. For example, a
manufacturer may choose to transmit a MAC address as
an identifier.
Account Prefix
The account prefix can be programmed into the PE
to extend the identification provided by the account
number.
This element is required and consists of an ASCII "L",
followed by 1-6 HEX ASCII digits for the account prefix.
When the PE does not need to transmit an account prefix,
"L0" shall be transmitted for this element. This element
corresponds with the receiver line number element in
the DC-07 protocol.
Receiver Prefix
In some cases, the PE may be programmed to futher
extend the identification provided by the account
number and account prefix by providing a receiver
number. This element is optional and consists of an
ASCII "R", followed by 1-6 HEX ASCII digits for the receiver
number. When the PE does not need to transmit a
receiver number, nothing shall by transmitted for this
element (ie. "R" or "R0" are not to to be transmitted in this
case).
Bosch Security Systems 10/22 BLCC615I
MENU 5-6-8
Digits
0
0
0
0
0
Digits
0
0
0
0
0
Digits
1
0
0
0
0
Digits
1
0
0
0
0
1
Digits
0
0
0
0
1
Digits
0
0
0
0
Solution 6000-IP
1) Press [MENU] + [5] + [6] + [8]. The keypad will
prompt you to select which option that you want to
program.
16
SIA IP Account
0
SIA IP Account Prefix
SIA IP Receiver Prefix
16
Press
0
6
0
0
2) Highlight the option required, then press [OK] to
select.
6
0
0
Rr1 Dest 1
6
Rr2 Dest 2
0
0
Exit
Press
6
0
0
3) Highlight the destination that you want to
program, then press [OK] to select.
SIA IP Account Rr1
Press
4) Use the numeric keys [0] to [9] to program the
parameter, then press [OK] to save and exit or press
[MENU] to exit without saving.
Comms > IP Reporting >
User Name/Password
1
Username
1
Password
1) Press [MENU] + [5] + [6] + [9]. The keypad will
prompt you to select which option to program
(username or password) that you want to program.
Username
Password
Exit
Press
2) Highlight the option required, then press [OK] to
select.
Rt1 Dest 1
Rt2 Dest 2
Exit
Press
3) Highlight the destination that you want to
program, then press [OK] to select.
Installation Manual
Comms Programming
OK or MENU
OK or MENU
OK to SAVE
Digits
Digits
OK or MENU
OK or MENU
MENU 5-6-9
16
16
9-9
Advertisement
Chapters
Table of Contents
