Keypad Backlight; Keypad & Reader Options; Name; Area Options - Bosch Solution 6000-IP Installation Manual

Devices > Commands >

Keypad Backlight

This menu allows you to adjust the brightness of the
backlight on the keypad's LCD display. Each keypad can
be adjusted separately to suit the customers needs.
1) Press [MENU] + [6] + [0] + [9] and use the up and
down arrows to highlight the keypad in the list
then press [OK].
Keypad 001 Backlight
L
Press
2) Use the arrow keys to set the required backlight
level. Each time a key is pressed the backlight will
adjust to the new level. When finished press [OK].
Bosch Security Systems 10/22 BLCC615I
-
  MENU 6-0-9
H
OK to SAVE
Solution 6000-IP
Installation Manual

K E Y PA D & R E A D E R O P T I O N S
Devices > Keypads & Readers >

Name

K e y p a d 1
This menu allows you to program the name or location
description of the keypad or LAN reader.
1) Press [MENU] + [6] + [1] + [0] and select the keypad
or LAN reader from the list and press [OK].
Name Kp1
Keypad 1 Name
Press  OK to SAVE
2) Use the arrow and number keys to move and
change text. When the Reader Name is complete,
press [OK]. At any time you can press the [OFF] key
to clear the text from the current cursor position to
the end of the line.
See Alpha Text Programming in Section 4 -
i
Programming Overview for further detail on entering
Note
alpha text.
Devices > Keypads & Readers >

Area Options

1

All On Arming Allowed

2 Part On Arming Allowed
3 Disarming Allowed
4
Single Button Control
5
All User Areas
6 Zero Exit Time
7 PIN To Change Area
8 Home Area Only
1) Press [MENU] + [6] + [1] + [2] and select the keypad
or LAN reader from the list then press [OK].
2) Use the up and down arrow keys to highlight the
option then press the [ON] key to enable or the
[OFF] key to disable.
 All On Arming Allowed
 Part On Arming Allowed
 Disarming Allowed
Press OK ON OFF MENU

3) Repeat Step 2 until all options are programmed as
required, then press [OK] to save and exit or press
[MENU] to exit without saving.
Device Programming

-
MENU 6-1-0
 
N a m e
MENU 6-1-2

Y
Y
Y
Y
N
N
N
N
10-3