Table of Contents
Advertisement
Date/Time/Time Format
The final three options allow the user to set the date,
time, and time format. If the oven is connected to
the internet, the date and time will synchronize with
an online world clock.
Reboot
Restarts the controller/equipment.
Network
If the oven is connected to a ConnectWare module or
via Ethernet, information about the connection status
will be visible here. WiFi credentials (if applicable) can
also be input/changed.
Load Menu from USB: OneTouch
Controller
USB setup: When loading from USB, the recipe
file and images/icons must be compressed into a
TGZ file. If saving the menu from the oven (see
below), the oven will create the TGZ file in a way
that can be loaded easily to other ovens. ChefComm
OneTouch also creates TGZ files for recipe updates.
TGZ menu files are not backwards-compatible for
the legacy controller.
When the oven is off or cooling down, insert the
USB (see below).
Figure 17: Insert USB
The oven will automatically detect the device. Select
"Update" to proceed or "Cancel" to cancel.
The update will take several seconds, after which the
controller will reboot one or two times. After the
controller reboots, wait 10 seconds and then remove
the USB drive.
NOTE: The process is identical for updating oven
firmware. Do not update firmware unless instructed
by the factory.
Save Menu to USB: OneTouch
Controller
When the oven is off or cooling down, insert the USB
(see previous section).
Select "Save to USB."
ECO-1001 / Revision G / August 2023
13
Advertisement
Table of Contents
