Counters Screen; Options Screen; Editing; Cook More - TurboChef ECO Owner's Manual

Info Mode: Counters Screen
From the Counters screen, view the following in
hours or counts:
- Cook counter
- Total cook time
- Magnetron time
- Total time (oven on)
- Power cycles: The number of times the oven has
cycled power.
- Fault log: View time stamps of each fault
occurrence and the fault code.
Info Mode: Options Screen
From the Info Mode Information or Counters
screen, touch "Login" to access the Options screen.
When prompted, input the password
then touch "ENTER."
From the options screen, enable/disable:
-

Editing

-

Cook More

-

Load Menu

-

VAC

-

Demo Mode

-

Manual Cooking

-

Diagnostic Mode

- F2 Bypass
Editing
Edit Mode shows or hides the button that allows
the operator to change menu settings, rename
food groups and items, and change the cooking
temperature. The Edit icon will be displayed at the
bottom of the screen (page 19) when this option
is set to YES. See pages 30-36 for more details on
editing menu settings.
Cook More
Cook More controls whether or not the three "cook
more" options appear when a cook cycle is done.
This option must be enabled in order to cook an
item beyond its original cook time. See page 22 for
details.
Load Menu
Load Menu enables or disables USB detection, which
allows the operator to upload and/or download new
menu settings from USB. Setting Load Menu to NO
will prevent the operator from loading a menu. See
page 28 for more details.
VAC
When VAC is set to YES the incoming voltage will
be displayed on the Info screen. This is set by the
9 4 2 8 and factory and should not be changed.
Demo Mode
Demo Mode is a feature used to demonstrate the
cooking features of the oven without turning on the
heaters or microwave system. Demo Mode must be
set to NO during regular operation.
Manual Cooking
When Manual Cooking is set to YES, the operator can
cook items "on the fly." See page 23 for more details.
Diagnostic Mode
Diagnostic Mode allows the operator to view and
test oven components. This mode should only
be used by qualified service technicians, unless
otherwise instructed by TurboChef.
Continued on next page...
ECO-1001 / Revision G / August 2023
25