Table of Contents
Advertisement
12
ONETOUCH CONTROLLER OPERATION
Figure 16: OneTouch Settings Menu
Settings Mode: OneTouch Controller
To access the Settings Mode, touch the Settings icon
(page 8) and input the pass code
From the Settings Mode, access:
- Data Plate
- Data Log
- Oven Settings (see below for more info)
- Fault Counts
- Fault History
- Service Settings
- Network (see below for more info)
NOTE: Additional settings will be available for
technician or production test logins.
Oven Settings
Master Volume
Set the volume from 1-10.
Menu Edit
Enable or disable the button that allows the operator to
edit recipe settings. See pages 14 for more details.
Manual Cook
Enable to allow access to Manual Cooking mode. See
page 11 for more details.
Menu Download
Downloadable from equipment onto a USB.
Temperature Units (C/F)
The temperature measurement setting is configured
at the factory. Touch to change the temperature
measurement settings.
Show Grid/List View Toggle
Enable or disable the button that allows the operator
to change between icon/tile view and list view on the
Group and Recipe screens.
Search
Allows for a quick recipe search.
Demo Mode
9 4 2
8.
Demo Mode is a feature used to demonstrate the
cooking features of the oven without turning on the
heaters or microwave system. Demo Mode must be
disabled during regular operation.
F2 Bypass
The F2 alarm indicates the oven temperature is
to low. F2 Bypass Enabled means the oven will
not terminate a cook cycle when an F2 alarm
is encountered. The oven will still log the fault
condition. F2 Bypass Disabled means the oven will
function as it normally would; i.e., when an F2
alarm is discovered during a cook cycle, the oven will
terminate the cook cycle.
Language
The default language is English. To change to
another language, touch "Language: English"
and then touch the preferred language and touch
"ENTER."
ECO-1001 / Revision G / August 2023
Advertisement
Table of Contents
