Related Manuals for TurboChef ECO
Summary of Contents for TurboChef ECO
- Page 1 OWNER’S MANUAL f or t h e tu r b o c h ef ec o r a pi d co o k o v en ©2022-2023 TurboChef Technologies, LLC ECO-1001 / Revision G / August 2023...
- Page 2 ECO-1001 / Revision G / August 2023...
- Page 3 For further information, call 800.90 TURBO +1 214.379.6000 ECO-1001 / Revision G / August 2023...
- Page 4 Errors – descriptive, typographic, or pictorial – are subject to correction. Specifications are subject to change without notice. Please carefully read this manual and retain it for future reference. ECO-1001 / Revision G / August 2023...
-
Page 5: Table Of Contents
ChefComm OneTouch® Open Kitchen Date and Time Prompt Voltage Selection Ventilation Cleaning Daily Maintenance OneTouch Controller Operation Oven Controls: OneTouch Recipe Mode Manual Cook Mode Oven Settings Master Volume Menu Edit Manual Cook ECO-1001 / Revision G / August 2023... - Page 6 Info Mode Information Screen Counters Screen Options Screen Editing Cook More Load Menu Light Ring Demo Mode Manual Cooking Diagnostic Mode F2 Bypass Settings Screen Temperature f/c Language WiFi Network Sound Volume Set Date ECO-1001 / Revision G / August 2023...
- Page 7 Name a Group Delete a Group Move a Group Item Editing Options Edit Settings Name an Item Change Group Move an Item Delete an Item Troubleshooting North America Limited Warranty International Limited Warranty ECO-1001 / Revision G / August 2023...
- Page 8 This page intentionally blank. ECO-1001 / Revision G / August 2023...
-
Page 9: Important Safety Instructions
Carefully attend to the oven if paper, plastic, or other combustible materials are placed inside the oven to facilitate cooking. do not leave paper products, cooking utensils, or food in the cavity when the oven is not in use. SAVE THESE INSTRUCTIONS ECO-1001 / Revision G / August 2023... -
Page 10: Grounding Instructions
(1) Door (bent), (2) hinges and latches (broken or loosened), (3) door seals and sealing surfaces. (d) The oven should not be adjusted or repaired by anyone except properly qualified service personnel. SAVE THESE INSTRUCTIONS ECO-1001 / Revision G / August 2023... -
Page 11: Rf Interference Considerations
This symbol identifies the terminals which, when connected together, bring the various parts of an equipment or of a system to the same potential, not necessarily being the earth (ground) potential, e.g. for local bonding. SAVE THESE INSTRUCTIONS ECO-1001 / Revision G / August 2023... - Page 12 SAFETY INSTRUCTIONS This page intentionally blank. SAVE THESE INSTRUCTIONS ECO-1001 / Revision G / August 2023...
-
Page 13: Theory Of Operation
Depth (Door open): 34.3” (871 mm) This manual includes instructions for installing, Oven Weight cleaning, and operating the Eco oven. If you have questions that are not addressed in this manual, 118 lbs. (54 kg) contact Customer Support at 800.90TURBO Cook Cavity Dimensions (+1 214.379.6000) or your Authorized Distributor. -
Page 14: Certifications
Heaters/Blowers 4.0 kW** WARNING: The oven must be properly placed International (UK) on a food station at all times. TurboChef will not 230 VAC, 50 Hz, 13 A recognize a fallen oven as a warrantable claim Max Input 2.6 kW, MW 2.0 kW, and is not liable for any injuries that may result. -
Page 15: Installing The Oven
Installation Near Open Heat Source 1. Prepare a surface at least 23.5” (597 mm) deep When placing a TurboChef oven near an open heat and capable of supporting 120 lb. (54 kg). source (Figure 2), strictly adhere to the following: 2. -
Page 16: Oven Restraint Kit
Open Kitchen also enables predictive servicing and maintenance of ovens. It is available for the Double Batch, Single Batch, Bullet, Eco, i1 (So ˇta, Panini, Waterless Steamer), i3, and i5 ovens with Touch Controls, as well as other Middleby brand equipment. -
Page 17: Ventilation
Ventilation The TurboChef Eco oven has been approved by Underwriter’s Laboratory for ventless operation (UL KNLZ listing) for all food items except for foods classified as “fatty raw proteins.” Such foods include bone-in, skin-on chicken, raw hamburger meat, raw bacon, raw sausage, steaks, etc. If cooking these types of foods, consult local HVAC codes and authorities to ensure compliance with ventilation requirements. -
Page 18: Cleaning
(optional). * The ECO Rapid Cook Oven includes a standard oven cleaner kit with oven guard (Product Number: 105701). Step 1: Prepare the Oven WARNING: The oven operates at approximately 500°F (260°C) and may cause injury if not allowed to cool properly. - Page 19 • Dry the oven interior with a clean towel. Step 9: Apply TurboChef Oven Guard • Spray TurboChef Oven Guard onto a clean towel. • Wipe the interior walls and the inside of the oven door. Step 9 CAUTION: DO NOT spray Oven Guard into the cavity, especially around the holes on the back oven wall.
-
Page 20: Onetouch Controller Operation
10. Preheat Progress Figure 6: Oven Controls: OneTouch Preheat Indicates preheat progress; touch the temperature icon (4) to view. NOTE: Display options vary depending on which features are enabled. ECO-1001 / Revision G / August 2023... -
Page 21: Recipe Mode
“Soaking” ensures the cavity surfaces absorb enough heat so that cooking will not be affected. While the oven is preheating, you can touch the “Recipes” button to view recipes or select a new group. Figure 9: Preheat ECO-1001 / Revision G / August 2023... - Page 22 WARNING: Dish/inside of oven and door are hot! Figure 13: Check Food Timer Step 8: Cooling Down When finished cooking for the day, touch the power button (bottom left corner) to begin cooling down. Figure 14: Off/Cooling Down ECO-1001 / Revision G / August 2023...
-
Page 23: Manual Cook Mode
% Microwave determines the amount of microwave, and can be set from 0-100% in 10% increments. For example, 50% means the microwave system will remain on for five continuous seconds for every ten seconds during the cook cycle. ECO-1001 / Revision G / August 2023... -
Page 24: Oven Settings
Touch to change the temperature measurement settings. Show Grid/List View Toggle Enable or disable the button that allows the operator to change between icon/tile view and list view on the Group and Recipe screens. ECO-1001 / Revision G / August 2023... -
Page 25: Date/Time/Time Format
The oven will automatically detect the device. Select “Update” to proceed or “Cancel” to cancel. The update will take several seconds, after which the controller will reboot one or two times. After the ECO-1001 / Revision G / August 2023... -
Page 26: Edit Mode: Onetouch
Settings menu (see page 12). 2. Touch the “+Group” button (Figure 18, above). 3. Input the group name and touch the blue arrow button to continue (Figure 19, below). Figure 19: Name New Group ECO-1001 / Revision G / August 2023... -
Page 27: Editing A Group
3. Select an option (Figure 23, adjacent column). the screen. If the edit button is not present, verify it is enabled in Settings (see page 12). 3. Touch the “+Recipe” button (Figure 25, above). 4. Select “New”. ECO-1001 / Revision G / August 2023... - Page 28 NOTE: This option will only appear if you opted to create a recipe from the “All Recipes” screen. Otherwise, the recipe temperature will be applied from the group from which “+Recipe” was selected. ECO-1001 / Revision G / August 2023...
-
Page 29: Adding A Recipe To A Group
2. Touch the Edit button in the top-right corner of the screen. If the edit button is not present, verify it is enabled in the Settings menu (see page 12). 3. Touch the “+Recipe” button (Figure 31, above). 4. Select “Existing”. ECO-1001 / Revision G / August 2023... -
Page 30: Editing A Recipe
3. Touch the Edit Pencil button for the group you e. Copy the recipe to a new group or groups. want to edit (Figure 34, above). Move the recipe to a new group or groups. g. Remove/delete the recipe. ECO-1001 / Revision G / August 2023... - Page 31 “More Groups” or “More Items.” Mode (page 30) is enabled. Touching this icon Or, if on screen two, touch “Previous Groups” or will allow you to edit menu items. “Previous Items.” ECO-1001 / Revision G / August 2023...
-
Page 32: Legacy Controller Operation
NOTE: When the oven is done warming up, it will “soak” for an additional eight minutes. “Soaking” ensures the cavity surfaces absorb enough heat so that cooking will not be affected. Figure 39: Warming Up ECO-1001 / Revision G / August 2023... - Page 33 Note: If the oven door is opened during a cook cycle, the cycle will pause until the door is closed. Touch “YES” to resume. Figure 42: Cooking Step 8: Check/Remove Food from Oven WARNING: Dish/inside of oven and door are hot! Figure 43: Remove Food ECO-1001 / Revision G / August 2023...
- Page 34 Cook & Brown More: 100% air, 100% microwave Step 10: Cooling Down When finished cooking for the day, touch “OFF” to turn the oven off and begin cooling down. Figure 45: Cooling Down/Off ECO-1001 / Revision G / August 2023...
-
Page 35: Manual Cook Mode
0-100% in cook cycle. 10% increments. For example, 50% means the microwave system will remain on for five continuous seconds for every ten seconds during the cook cycle. Continued on next page... ECO-1001 / Revision G / August 2023... -
Page 36: Info Mode
Select a location for the new menu item by first Menu Version selecting a group. Sage Firmware Phoenix Firmware Service Number VAC (Voltage) - View Incoming Tutorials: View information on installing, operating, and maintaining the oven. d. Select an item to overwrite. ECO-1001 / Revision G / August 2023... -
Page 37: Counters Screen
Cook More test oven components. This mode should only Load Menu be used by qualified service technicians, unless otherwise instructed by TurboChef. Demo Mode Manual Cooking Diagnostic Mode F2 Bypass Continued on next page... ECO-1001 / Revision G / August 2023... -
Page 38: F2 Bypass
SSIDs, or - Polish type in the WiFi network name and touch Enter. - Portuguese If you are unsure of the SSID for the network, - Russian contact your network administrator. - Spanish ECO-1001 / Revision G / August 2023... -
Page 39: Sound Volume
Information screen on page 25. 1. To set auto-on, ensure the time of day is accurate For help determining the correct network setup (above). information, contact your network administrator. Continued on next page... ECO-1001 / Revision G / August 2023... -
Page 40: Auto On On/Off
NOTE: To update a menu, you may need to verify oven will display the menu names. Otherwise this that access to the Load Menu screen is turned on. step will be bypassed. See page 25 for details. ECO-1001 / Revision G / August 2023... -
Page 41: Load Menu From Usb
3. Touch “OK” to begin saving the menu to the USB. Touch “CANCEL” to go back to the previous screen. 3. The oven will install each firmware file included with the update. Once installation is complete, the oven will display “Installation Complete.” ECO-1001 / Revision G / August 2023... -
Page 42: Edit Mode: Legacy
If recipe settings are not cooking as desired, consult 1. Place the oven in Edit Mode. your menu developer, authorized distributor, or TurboChef Customer Support. To change a set temperature, 1. Place the oven in Edit Mode. ECO-1001 / Revision G / August 2023... -
Page 43: Delete A Group
Uppercase, blue icon 2. Touch the Group to move. Lowercase, gray icon Delete a Group To delete a group, 1. Place the oven in Edit Mode. Continued on next page... ECO-1001 / Revision G / August 2023... -
Page 44: Item Editing Options
- Edit Settings (page 33) 1. Touch “EDIT” to place the oven in Edit Mode. - Name Item (page 35) - Change Group (page 35) - Move Item (page 36) - Delete Item (page 36) ECO-1001 / Revision G / August 2023... -
Page 45: Edit Settings
0-100% in 10% increments. For example, 50% means the microwave system will remain on for five continuous seconds for every ten seconds during the cook cycle. Once all changes are made, touch “SAVE.” ECO-1001 / Revision G / August 2023... - Page 46 NOTE: Touch the Alt icon to show special characters. Run a Test Cook Cycle If desired, touch “Cook” to perform a test cook. NOTE: The oven may require additional warm-up time before a test cook can be performed. ECO-1001 / Revision G / August 2023...
-
Page 47: Name An Item
Select a new group. Touch an item space to indicate where the item will be moved. NOTE: If an item is moved to a space that already contains settings, the old settings will be overwritten. ECO-1001 / Revision G / August 2023... -
Page 48: Move An Item
Delete Item From the “Editing Options” screen (page 25), select “Delete Item.” Touch “OK” to delete the item. NOTE: Once an item is deleted, it cannot be recovered. ECO-1001 / Revision G / August 2023... -
Page 49: Troubleshooting
Oven is not Incorrect oven model specified. From the Info Mode Manufacturing screen, ensure that cooking the oven model is set to “Eco.” properly. Oven is not clean. (Large deposits of Clean the oven following the cleaning instructions on grease, carbon, or food debris dilute pages 6-7. - Page 50 Blockage of cool air into the oven. Remove anything that may be obstructing the flow of cool air into the side/rear oven panels. Rear cooling fan exhaust guard(s) Make sure the rear fans are free of debris. clogged. ECO-1001 / Revision G / August 2023...
-
Page 51: North America Limited Warranty
“Manual”), a copy of which is provided to you with the Equipment or otherwise will be furnished to you upon request, is excluded from this warranty. This warranty does not apply to damage or failure which results, in TurboChef ’s or its service agent’s sole opinion, from failure to provide a suitable installation and operating environment (including power... - Page 52 TurboChef will invoice customer and customer will pay such invoice based on terms of net 10 days. Customer also agrees to pay any cost incurred by TurboChef or its service agent associated with a service agent responding to a call for service, but then being refused or unable to gain access to the Oven on Customer’s premises.
-
Page 53: International Limited Warranty
International Limited Warranty This Limited Warranty shall apply to the sales of all TurboChef Eco ovens (the “Equipment”) manufactured by TurboChef Technologies, LLC (“TurboChef ”), and sold to purchasers outside of the United States, Canada, Puerto Rico, Central and South America by an Authorized Distributor of TurboChef International (the “Authorized Distributor”). - Page 54 +1 214.379.6073 The claim must include the serial number of the Equipment and be received by TurboChef on or before the last day of the Warranty Period. Upon receipt of Your claim, TurboChef will promptly notify an Authorized Distributor or an authorized service agent to contact You, to verify Your claim and, if necessary, to arrange for an on-site repair visit during normal working hours.
- Page 55 This page intentionally blank. ECO-1001 / Revision G / August 2023...
- Page 56 + 1 2 14.37 9.60 00 p ho n e t urbo ch ef.co m + 1 2 14.37 9.60 73 fax Part Number: ECO-1001 / Revision G /August 2023 Country Code: NA/EU ECO-1001 / Revision G / August 2023...