Table of Contents
Advertisement
4
SPECIFICATIONS AND INSTALLATION
Oven Restraint Kit
Part Number: TC3-0242
WARNING: The Oven Restraint Kit will not
prevent the oven from falling off a countertop
if the oven is pulled off or allowed to slide off
the edge. Installation instructions are included
with the kit.
ChefComm OneTouch
Part Number: CON-7006
ChefComm OneTouch lets you easily create
menu settings on a computer and upload them
to an oven via USB. For more information, call
TurboChef Customer Support at 800.90TURBO
or +1 214.379.6000.
Open Kitchen
Open Kitchen is more than just another piece of
WiFi-compatible kitchen equipment. It is a robust
enterprise system for developing recipes, updating
your oven settings, interpreting oven data, and much
more. Open Kitchen also enables predictive servicing
and maintenance of ovens. It is available for the
Double Batch, Single Batch, Bullet, Eco, i1 (So ˇta,
Panini, Waterless Steamer), i3, and i5 ovens with
Touch Controls, as well as other Middleby brand
equipment.
Date and Time Prompt
The oven maintains a data log that contains valuable
information about the operation of the oven,
including faults, items cooked, and other events. An
accurate date and time are important for the data
log. If the oven loses the date and time as a result
of prolonged disconnection from power, a prompt
will alert the operator to set the date and time.
The prompt will only occur once. If bypassed, the
operator must update the date and time from the
Info Mode Settings screen (see page 14 for details.)
Registration Prompt
At the time the oven is installed, registration
information should be input into the oven including
store number, address, et cetera. This information
is important for warranty tracking purposes. If
registration information is not entered, you may
be prompted by the oven to input the registration
information whenever the oven is turned on at the
start of the day. To eliminate the prompts, simply
fill in the registration information requested at the
prompt screen.
Voltage Selection
For North America oven models, the oven will detect
208 or 240 incoming voltage.
If incoming voltage for the store is different than the
factory-preset voltage, the operator will be required
to select either 208 or 240. The correct voltage will
be enlarged on the screen, identifying which option
to touch (see Figure 3 below).
Figure 3: Selecting Voltage
ECO-1001 / Revision G / August 2023
Advertisement
Table of Contents
