Table of Contents
Advertisement
3. Security Type
The Security Type is set by your WiFi router. After
touching "Security Type," match one of the four
displayed security types to the one your router is
using by selecting one of the following options from
the screen: Open, WPA, WPA2, WEP.
After selecting the correct Security Type, touch Enter.
If you are unsure of the Security Type used by the
network, contact your network administrator. In
some instances, the Security Type may be printed on
a label on the bottom of your WiFi router.
4. WiFi Password
The WiFi Password is the case sensitive password
needed to join the WiFi network. After touching the
WiFi Password icon, use the on-screen keyboard to
type in the WiFi network password and touch Enter.
If you are unsure of the WiFi Password for the
network, contact your network administrator.
NOTE: "Open" networks do not use WiFi
passwords. Clear or leave this field empty when using
the oven on an "Open" network.
5. Channel
The Channel is determined and assigned by the WiFi
router.
NOTE: If you are experiencing difficulty obtaining
or keeping WiFi connectivity, TurboChef
recommends setting the WiFi router's channel to 1.
Change the network channel by logging into your
router. For help with your WiFi router, contact your
network administrator.
6. MAC IP
The MAC IP is automatically assigned.
7. SAVE Button
After entering or updating any of the settings on the
WiFi Network screen, press the SAVE button.
Failure to press the SAVE button will result in
!
the loss of any changes that have been made.
Ensuring Connectivity
Verify if the oven is connected from the Info Mode:
Information screen on page 25.
For help determining the correct network setup
information, contact your network administrator.
If MAC IP is blank, the oven may not be configured
properly to connect to a WiFi network. Call
TurboChef Customer Support at 800.90TURBO or
+1 214.379.6000.
Sound Volume
Touch "Volume" and use the plus or minus icons or
slider to increase or decrease the oven sound.
Date
An accurate date is important for using "auto-on"
and "auto-off ". It also helps ensure the accuracy of
diagnostics and fault condition reporting.
NOTE: The oven may not retain the date if left
unplugged for a prolonged period of time (more
than several hours).
To set the date, touch "Date." Enter the date in the
following format - MM/DD/YY. Touch "ENTER" to
save the changes.
Time
An accurate time is important for using "auto-on"
and "auto-off " (see below). It also helps ensure the
accuracy of diagnostics and fault condition reporting.
NOTE: The oven may not retain the date if left
unplugged for a prolonged period of time (more
than several hours).
NOTE: The clock will not automatically update for
Daylight Savings Time.
To set the time, touch "Time." Enter the time
in 24-hour format (8:30 p.m. = 20:30). Touch
"ENTER" to save the changes.
NOTE: The user interface will automatically convert
the time to 12-hour format.
Auto On
"Auto On" is a feature that turns the oven on
automatically at a specific time of day.
1. To set auto-on, ensure the time of day is accurate
(above).
Continued on next page...
ECO-1001 / Revision G / August 2023
27
Advertisement
Table of Contents
