Edit Mode: Onetouch; Creating A Group - TurboChef ECO Owner's Manual

Hide thumbs Also See for ECO:

Table of Contents

ONETOUCH CONTROLLER OPERATION

Edit Mode: OneTouch Controller

To enable Edit Mode,

1. Touch the Settings icon (page 8)

2. Touch "Login" to access the Operation Settings

screen. When prompted, enter the passcode

9 4 2 8 and then touch "Enter."

3. Set the "Editing" toggle to the on position.

The "Editing" icon will appear on the top-right corner

of the screen when in menu mode (see page 8). When

"Editing" is touched the operator can create, delete,

move, or edit a group or item.

Figure 18: Edit Mode: Create Group

NOTE: At any time, touch the "X" in the top-right

corner to cancel the action of creating a group.

From the group select screen:

1. Touch the Edit button in the top-right corner of

the screen (Figure 18, above).

If the edit button is not present, verify it is

enabled in the Settings menu (see page 12).

2. Touch the "+Group" button (Figure 18, above).

3. Input the group name and touch the blue arrow

button to continue (Figure 19, below).

Figure 19: Name New Group

4. Select an image and touch the blue "Save"

button (Figure 20, below).

Figure 20: Select Group Image

NOTE: If you have a USB drive with image files

inside a folder named "Images," insert it from this

screen and select "USB" to assign the image.

5. Add recipes (or subgroups) to the group by

selecting/deselecting each recipe, and click the

blue "Next" button.

Figure 21: Add Recipes/Subgroups

ECO-1001 / Revision G / August 2023

Table of Contents