Onetouch Controller Operation; Oven Controls: Onetouch - TurboChef ECO Owner's Manual

8

ONETOUCH CONTROLLER OPERATION

Oven Controls: OneTouch Controller
1. Power Icon
Touch to begin preheating. By default, the oven
preheats to the lowest set temperature.
2. Group Select
Select a group and the oven will preheat to its set
temperature. The set temperature will be displayed
near the group name. If "All Recipes" is selected, the
oven will preheat to the lowest recipe temperature in
the menu.
3. Off Icon
Touch to turn the oven off (cool down).
4. Temperature Icon
While the oven is preheating, touch to view progress
(9). While the oven is at temp (idle), this button
will not be operational, but will display the oven
temperature for informational purposes.
5. Recipes
When in Manual Cook Mode (6) or Preheat Progress
(9), touch "Recipes" to return to Recipe Cook Mode.
If the oven is preheating, it will not allow recipes to
be selected for cooking until the set point is reached.
6. Manual Cook
Touch to enter Manual Cook Mode (page 11).
7. WiFi Network/Network Settings
If the oven is connected via WiFi or Ethernet to
Open Kitchen
status will be visible here.
8. Settings Icon
Touch to access Info Mode (page 12). A pass code
(9 4 2 8) will be required.
9. Edit Icon
The Edit icon will only be displayed when Edit Mode
(page 14) is enabled. Touching this icon will allow
you to edit menu items.
10. Preheat Progress
Indicates preheat progress; touch the temperature
icon (4) to view.
, information about the connection
TM
1
Figure 4: Oven Controls: OneTouch Power On
3 4 5
Figure 5: Oven Controls: Group/Temperature Select
Figure 6: Oven Controls: OneTouch Preheat
NOTE: Display options vary depending on which features
are enabled.
ECO-1001 / Revision G / August 2023
9
7 8
6 2