30
LEGACY CONTROLLER OPERATION
Edit Mode: Legacy Controller
To enable Edit Mode,
1. Touch the "i" icon when the oven is off or
cooling down.
2. From the Info Mode screen, touch "Login" to
access the Options screen. When prompted, enter
the passcode
3. Set "Editing" to "YES" to enable Edit Mode.
The "Edit" icon will appear at the bottom of the
screen in menu mode. When "Edit" is touched from
the group select screen, the operator can:
-
Edit the set temperature
-
Edit the bottom temperature offset
-
Access the edit items screen
-
Name a group
-
Delete a group
-
Move a group
When "Edit" is touched from the item select screen,
the operator can:
-
Edit Settings (page 33)
-
Name Item (page 35)
-
Change Group (page 35)
-
Move Item (page 36)
-
Delete item (page 36)
Edit Set Temperature
The menu set temperature should never be changed
to compensate for over-cooking or under-cooking.
If recipe settings are not cooking as desired, consult
your menu developer, authorized distributor, or
TurboChef Customer Support.
To change a set temperature,
1. Place the oven in Edit Mode.
9 4 2 8
and then touch "Enter."
2. Touch the current set temperature.
NOTE: The set temperature will apply only
to the groups adjacent to it. Be sure to check
the temperature for groups 1-8, but also for
groups 9-16.
3. Using the number keys, enter the new set
temperature. The temperature range is
300–540°F (149–282°C).
4. Touch "ENTER" to confirm the change.
Access Edit Items Screen
Item settings can be edited from the Edit Settings
screen. See page 30 for more details.
Name a Group
To name or edit a group name,
1. Place the oven in Edit Mode.
ECO-1001 / Revision G / August 2023