Safety Instructions; Explanation Of Safety Instructions; General - Fronius LaserHybrid WF 25i Operating Instructions Manual

Safety Instructions

Explanation of
Safety Instruc-
tions
Indicates an immediate danger.
▶
Indicates a possibly dangerous situation.
▶
Indicates a situation where damage or injury could occur.
▶
NOTE!
Indicates the possibility of flawed results and damage to the equipment.

General

The LaserHybrid head has been manufactured using state-of-the-art technology
and according to recognized safety standards. If used incorrectly or misused,
however, it can cause
-
-
-
All persons involved in the commissioning, operation, maintenance, and servicing
of the LaserHybrid head must
-
-
-
The Operating Instructions must always be at hand wherever the LaserHybrid
head is being used. In addition to the Operating Instructions, all applicable local
rules and regulations regarding accident prevention and environmental protec-
tion must also be followed.
All safety instructions and warning signs on the LaserHybrid head itself must:
-
-
-
-
For the location of the safety and danger notices on the LaserHybrid head, refer
to the section headed "General" in the Operating Instructions for the LaserHy-
6
DANGER!
Death or serious injury may result if appropriate precautions are not taken.
WARNING!
Death or serious injury may result if appropriate precautions are not taken.
CAUTION!
Minor injury or damage to property may result if appropriate precautions are
not taken.
injury or death to the operator or a third party,
damage to the LaserHybrid head and other material assets belonging to the
operating company,
inefficient operation of the LaserHybrid head.
be suitably qualified,
have knowledge of welding and
have read and implemented carefully these Operating Instructions and the
OI for the following system components:
Laser
Laser optics
Power source and associated wirefeeder
Robot and its controller
be kept in a legible state
not be damaged/marked
not be removed
not be covered, pasted, or painted over.