Canceling The Password Protection - Siemens SITRANS TF280 WirelessHART Operating Instructions Manual

5.8

Canceling the password protection

Requirements
● The device is ready for commissioning
● You are acquainted with the principles of operation: Use of local user interface (Page 38)
Procedure
You must deactivate the PIN input function so that the device configuration can be changed.
If the device is in the factory state, the PIN input function is preset.
1. Parameter. Call "5.1 Active / inactive" (Page 57).
2. Begin with input of the PIN.
3. Select setting "Inactive", and confirm.
4. The PIN input function is canceled.
SITRANS TF280 WirelessHART
Operating Instructions, 10/2010, A5E02619566-02
Enable/Disable
5.1
On
Edit
5.2.1
If the device is in the factory state, enter the preset PIN "4711".
Enable/Disable
5.1
Min. level 1:
0
Enable/Disable
5.1
Off
On
Enable/Disable
5.1
Off
Edit
Change further parameters, or call the measured value view.
Enable/Disable
5.1
Min. level 1:
4 7 1 1
5.8 Canceling the password protection
Operation
61