Activation; Exceeding The Set Speed; Deactivation; Intelligent Speed Assist (Isa) - Fiat 500e 2024 Owner's Manual

Table of Contents

Advertisement

Active Speed Limiter Button
This feature allows you to program the maximum speed
of travel for your vehicle.
NOTE:
The Active Speed Limiter can be set with the vehicle
stationary or in motion. The minimum speed it can be
set to is 18 mph (30 km/h).
A
CTIVATION
To activate the feature, push the Active Speed Limiter
button located on the right side of the steering wheel. A
message will appear along with an indicator light in the
instrument cluster display to signal that Active Speed
Limiter has been activated.
NOTE:
If Cruise Control or Adaptive Cruise Control are active,
press the Active Speed Limiter button twice. The first
press will switch off the active function; the second
press will activate the speed limiter.
After the Active Speed Limiter on/off button has been
pushed, you must press the SET (+) or SET (–) button
to set the target speed (or RES button when there is
already a previously set target).
Push the SET (+) or SET (–) button to raise or lower the
target speed to the desired value, speed will increase/
decrease by 1 mph (1 km/h). Pushing and holding
down the SET (+) or SET (–) button will increase/
decrease the speed value by increments of 5 mph (10
km/h).
Each time that Active Speed Limiter is activated, it will
be set to the last programmed value from the previous

activation.

NOTE:
The Cruise Control (if equipped) and Adaptive Cruise
Control (if equipped) systems will be unavailable while
the Active Speed Limiter is in use.
E
T
S
S
XCEEDING
HE
ET
PEED
By fully pressing the accelerator pedal, the
programmed maximum speed can be exceeded while
the device is active.
In the event that the Active Speed Limiter set value
is exceeded manually with a driver acceleration, an
audible indicator will sound. The indicator light will
rapidly flash, and a message will appear in the
instrument cluster display.
The feature will remain disabled until the vehicle speed
drops below the set Active Speed Limiter value, where it
will reactivate automatically.
D
EACTIVATION
To turn off Active Speed Limiter, push the Active Speed
Limiter button on the right side of the steering wheel. A
STARTING AND OPERATING
message will appear in the instrument cluster display to
confirm that the feature has been turned off. You can
also deactivate Active Speed Limiter by pressing the
CANC button. In this case, the system is not completely
turned off, and the driver can reactivate the Active
Speed Limiter by pressing the RES button.
NOTE:
In the event of a system failure, the Active Speed
Limiter will switch off automatically and the indicator
light will switch to grey. In this event, please see an
authorized dealer.

INTELLIGENT SPEED ASSIST (ISA)

The Intelligent Speed Assist (ISA) system
combines the Active Speed Limiter and
Traffic Sign Assist (TSA) systems to
automatically adjust the maximum speed of
the vehicle based on detected traffic signs.
The Active Speed Limiter can be set with the vehicle
stationary or in motion. The minimum speed it can be
set to is 18 mph (30 km/h).
A
CTIVATION
To activate the feature, make sure the Traffic Sign
Assist (TSA) system is enabled within Uconnect Settings
ð
page
113, then push the Active Speed Limiter
button located on the right side of the steering wheel.
The message "Ready" will appear along with a white
indicator light in the instrument cluster display to signal
that the system has been activated.
75
4

Advertisement

Table of Contents
loading

Table of Contents