Table of Contents
Advertisement
24
GETTING TO KNOW YOUR VEHICLE
5.
When done, press the Back Arrow in the upper
right hand corner, then select "yes" to save the
charge schedule. The active schedule will be
indicated by the check mark to the right of the
schedule event line. The event action and time will
be displayed.
6.
To add another Scheduled Charging event, repeat
these steps.
NOTE:
A maximum of three independent Scheduled
Charging events can be scheduled at a given time.
NOTE:
●
If the charging schedule is not enabled, the vehicle
will charge whenever plugged in. It is not necessary
to set up the charging schedule to charge the
vehicle.
●
If the vehicle is plugged in outside of the charging
schedule set in the Uconnect system (and Charge
Until Full is not selected), the vehicle's battery will
not charge. Charging will only begin immediately if
the vehicle is plugged in within the time and day of
the week set in the schedule. Otherwise, charging
will automatically begin when the selected charge
time/day of the week occurs or whenever the vehicle
is plugged in with no charge schedule set.
●
If the vehicle is turned off outside of the charging
window, a radio pop-up message will be displayed,
which provides an option to begin charging the
vehicle immediately. The pop-up message asks
the driver if they would like to "Charge Now?" and
provides other information, including the next
charging schedule start time and estimated time
to charge the battery to 100%. If within one hour
of selecting "Yes," the vehicle is connected to a
powered EVSE, the vehicle will immediately begin
to charge (temporarily ignoring any set charge
schedule). To fully deactivate the charge schedule,
refer to the "Schedules" feature within the Electric
Vehicle App.
●
The charging schedule can also be overridden if an
EVSE is plugged in, unplugged, and then plugged in
a second time to the vehicle. This "double
plug sequence" will override the schedule that is set
in the radio, and begin charging the vehicle
immediately. The double plug sequence must be
completed within 10 seconds for it to override the
programmed schedule.
●
If "Charge Until Full" is selected, and the vehicle is
plugged in after the start time of the schedule, the
vehicle will start charging when it reaches the start
time the next day. If you would like to begin charging
immediately, and continue charging until the vehicle
is fully charged, you can select the "Charge Now"
option or use the double plug override option.
NOTE:
For information on jump starting your vehicle,
173.
AC Charging Level— If Equipped
The fourth screen within the Electric Pages App is the
AC Charging Level screen. From this screen, you can
select the rate at which your vehicle charges. Rate
selections 1 (low rate of charge) through 5 (high rate
of charge) are available. The lower the selected rate,
the longer it will take for your vehicle to reach a full
charge.
Charge Setting Screen
The Charge Setting can be adjusted by selecting one of
the levels 1 through 5, with 1 being the slowest rate of
charge and 5 being the fastest. The display also shows
information related to:
●
Battery Level — Indicates, in percentage, the high-
voltage battery SOC.
●
Estimate time to 100% — Corresponds to the time
required to obtain full recharging of the high-voltage
battery.
NOTE:
●
The Charge Setting will be saved each time the
vehicle is turned off, then back on again.
●
ð
For information on jump starting your vehicle
page
page
173.
KEYS
K
F
EY
OB
Your vehicle is equipped with a key fob which supports
Passive Entry, Remote Keyless Entry (RKE) and Keyless
Enter 'n Go™. The key fob allows you to lock or unlock
ð
Advertisement
Table of Contents
