Table of Contents
Advertisement
CAUTION!
Failure to follow these cautions can cause damage to
the heating elements:
●
Use care when washing the inside of the rear
window. Do not use abrasive window cleaners on
the interior surface of the window. Use a soft cloth
and a mild washing solution, wiping parallel to the
heating elements. Labels can be peeled off after
soaking with warm water.
●
Do not use scrapers, sharp instruments, or
abrasive window cleaners on the interior surface
of the window.
●
Keep all objects a safe distance from the window.
R
S
W
— I
E
AIN
ENSING
IPERS
F
QUIPPED
This feature senses rain or snowfall on the windshield
and automatically activates the wipers. Rotate the end
of the windshield wiper lever to one of the two detent
positions to activate this feature.
NOTE:
●
The Rain Sensing feature will not operate when the
wiper switch is in the LO, HI, or OFF position. Only in
one of the intermittent positions.
●
The Rain Sensing feature may not function properly
when ice or dried saltwater is present on the
windshield.
●
Use of products containing wax or silicone may
reduce rain sensor performance.
●
The Rain Sensing feature can be turned on and off
ð
through the Uconnect system
page
Rain sensing stalk
1 — Automatic Wiping - Slow
2 — Automatic Wiping - Fast
Rotate the switch the first detent for slow operation or
the second detent for fast operation.
Place the ring in the O (off) position when not using the
system.
NOTE:
In the event of a rain sensor failure, a dedicated
telltale on the instrument cluster will appear to warn
the customer (if equipped).
CLIMATE CONTROLS
The Climate Control System allows you to regulate the
temperature, air flow, and direction of air circulating
throughout the vehicle. The controls are located on the
touchscreen and on the instrument panel below the
radio.
GETTING TO KNOW YOUR VEHICLE
NOTE:
In the event of low high voltage battery levels or
113.
very cold/very hot weather, remember to connect
the vehicle to a power outlet to enable climate
programming.
T
C
EMPERATURE
ONTROL
Uconnect 5 NAV With 10.25–
inch Display Automatic Climate Controls
MAX A/C Button
Press and release the MAX A/C button
on the touchscreen to change the current
setting to the coldest output of air. The MAX
A/C indicator illuminates when MAX A/C is
on. Pressing the button again will cause the MAX A/C
operation to exit. Pressing other settings will cause the
MAX A/C to exit.
43
O
VERVIEW
2
Advertisement
Table of Contents
